Filter
Top Products
Advanced features
13
The
LCD
will shows:
14
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
ENTER
.
15
Using the cursor key, select the mode you want. Then press
ENTER
.
If you want to make another setting, repeat step 14 and 15.
Note: Choose “-----” if you do not want to specify for this programmable one-
touch key.
16
Select “Exit” and press
ENTER
.
17
Press
STOP
to return your machine to standby mode.
Fax dialing with programmable one-touch
To dial a fax call using a programmable one-touch number:
1
Set your document in the
ADF
.
2
Make any necessary adjustments as usual.
3
Press the programmable one-touch key in which you’ve stored the fax commu-
nication command.
Your fax will perform the operation now, or at whatever time you programmed.
Note: To review the details of each operation, review the instructions for that
operation. See page 3.38 for a list of each operation and where to find it.
If you programmed this key to delay its operation, the
LCD
shows:
If you programmed this key to perform the operation immediately after you press it,
the
LCD
shows the number:
Printing a list of your programmable one-touch keys
You fax machine can print a list of the commands you’ve stored in your programma-
ble one-touch keys.
The list includes:
(1) each key’s one-touch number
(2) the fax/telephone number
(3) when the command should start
(4) which command you’ve selected
(5) if applicable, the selected call group(s) or F-Code box(es) you’ve stored in
the key
(6) the individual settings for each key
To print a list of programmable one-touch keys, press
MENU
,5,1,1,1,
ENTER
.
Erasing a programmable one-touch key
1
Press
MENU
,3,4,0,2. The
LCD
shows:
2
Select the programmable one-touch key you want to erase.
Note: You can select the programmable one-touch key by pressing that key
on the control panel.
3
Press
ENTER
. The
LCD
shows:
Important: If you want to quit without erasing the one-touch number
you’ve selected, press [No]. The fax will return to step 2.
4
Press [Yes] to erase the number.
To erase another program one-touch number, repeat steps 2–4. Or press
STOP
to
return to standby mode.
3.45