Filter
Top Products
Just in case …
What you see on the
LCD
What it means/What to do
Document Full You tried to enter an document into an F-Code
box or a Batch box, but the machine has reached
its capacity. Delete documents stored in box until
the machine will let you proceed.
Document Jam An original document jam while you are using
the ADF for either faxing or copying. See page
5.1 for instructions on clearing the jam.
Document Stored A received document was in your fax’s memory
when you tried to turn off the security reception
passcode. Print the received document from your
fax’s memory, then retry the desired operation.
...or ...
You tried to erase a Batch box which contains at
least one document.
Erase the document(s), then try again.
Drum Cartridge is Almost EmptyYour drum will need to be replaced soon.
Please contact your authorized Muratec dealer to
purchase a new drum cartridge if you don’t
already have one.
Hang Up Phone The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the “hook” button.
In Relay Box You tried to store a document for polling in an
F-Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.
In Secure Box You tried to store a document for polling in an
F-Code box which is set to be a security box.
Select an F-Code box which is set to be a bulletin
box, then try again.
Invalid I.D. Code The F-Code box
I
.
D
. code you entered isn’t valid.
Try re-entering your F-Code box
I
.
D
. code.
Invalid Number You pressed a key which has no function during
the current operation.
What you see on the
LCD
What it means/What to do
Invalid Protect Passcode The protection passcode you entered isn’t valid.
Repeat the operation, entering the correct protec-
tion passcode.
Memory Overflow During transmission (or copying), you tried to
Keep These Pages? enter more pages into memory than your fax
could store. Press [Y
ES
] to tell your fax to keep as
many pages in memory as possible, or press [N
O
]
to delete from memory all pages stored during
this operation (but not previous operations).
No Command Stored You pressed
COMM
.
CANCEL
/
CONFIRM
to review
upcoming commands, but your fax machine had
none stored.
No Department Code You tried to turn on the department code setting
but there are no department codes stored in
your fax machine. Store at least one department
code, then try again.
...or ...
You entered incorrect department code at fax
sending while the department feature is on.
Enter correct department code.
No Document Stored You tried to print a document from memory, but
your fax machine had none stored.
No Drum Unit The drum unit is missing or has not been prop-
erly installed in your fax machine.
Please properly install the drum unit.
No Number Stored You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another
number or dial a phone number directly from the
numeric keypad.
No Protect Passcode You tried to program a security feature (see
page 3.46), but there’s no protection passcode
stored in your fax machine. Store a protection
passcode in your machine, then retry again.
5.6