Filter
Top Products
151
CHAPTER 6 PORT FUNCTIONS
Table 6-5. Port Mode Register and Output Latch Settings when Using Dual-Functions
P00 INTP0 Input 1 (Fixed) None
TI00 Input 1 (Fixed) None
P01 INTP1 Input 1 ×
TI01 Input 1 ×
P02 to P06
INTP2 to INTP6
Input 1 ×
P07
Note1
XT1 Input 1 (Fixed) None
P10 to P17
Note1
ANI0 to ANI7 Input 1 ×
P30 to P32 TO0 to TO2 Output 0 0
P33, P34 TI1, TI2 Input 1 ×
P35 PCL Output 0 0
P36 BUZ Output 0 0
P40 to P47 AD0 to AD7
Input/Output
×
Note2
P50 to P57 A8 to A15 Output ×
Note2
P64 RD Output ×
Note2
P65 WR Output ×
Note2
P66 WAIT Input ×
Note2
P67 ASTB Output ×
Note2
P120 to P127
RTP0 to RTP7
Output 0 desired value
P130, P131
(Note1)
ANO0, ANO1 Output 1 ×
Dual-functions
Name
P××PM××
Input/Output
Pin Name
Notes 1. If these ports are read out when these pins are used in the alternative function mode, undefined values
are read.
2. When the P40 to P47 pins P50 to P57 pins, and P64 to P67 pins are used for dual-functions, set the
function by the memory extension mode register (MM).
Cautions 1. When not using external wait in the external memory extension mode, the P66 pin can be used
as an I/O port.
2. When port 2 and port 7 are used for serial interface, the I/O latch or output latch must be
set according to its function. For the setting methods, see Figure 16-4 “Serial Operation
Mode Register 0 Format”, Figure 17-4 “Serial Operation Mode Register 0 Format”, Figure
18-3 “Serial Operation Mode Register 1 Format”, and Table 19-2 “Serial Interface Channel
2 Operating Mode Settings”.
Remarks × : don’t care
PM×× : port mode register
P×× : port output latch