Filter
Top Products
Manage the WAN and LAN Network Settings
200
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
The previous figure shows only the top of the Internet Setup screen.
6. Configure a VLAN for interface WAN1:
a. Make sure that WAN1
is selected from the menu and that the Enable This Interface
check box is selected for interface WAN1 (it is by default).
b. Select the Use VLANID check box.
c. Enter a VLAN ID that applies to interface W
AN1.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
d. To specify a priority for the VLAN, in the
Priority (802.1p) field, enter a value from 0
to 7.
e. Click the Apply
button.
Your settings are saved for interface WAN1.
7. Configure a VLAN for interface W
AN2:
a. From the menu below DSL mode, select WAN2.
b. Make sure that the
Enable This Interface check box is selected for interface WAN2.
If you already enabled interface WAN2 (see Enable the W
AN2 Interface for IPTV on
page 197), the check box is selected.
c. Select the Use VLANID check box.
d. Enter a VLAN ID that applies to interface W
AN2.
The VLAN ID can be in a range from 0 to 4094. The default VLAN ID is 0.
e. To specify a priority for the VLAN, in the
Priority (802.1p) field, enter a value from 0
to 7.
f. Click the Apply
button.
Your settings are saved for interface WAN2.