Filter
Top Products
Manage the Internet Settings Manually
71
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
Transfer Mode
These settings are not disabled but do not apply to a cable or fiber
connection. Y
ou can ignore these settings.
DSL Mode
Enable This Interface Make sure that W
AN1
is selected from the menu and that the Enable This
Interface check box is selected. These are the default settings.
Note: For information about interface WAN2, see Enable the WAN2
Interface for IPTV on page 197.
Multiplexing Method
These settings are not disabled but do not apply to a cable or fiber
connection. Y
ou can ignore these settings.
VPI
VCI
Use VLANID Select the Use VLANID check box and enter the VLAN ID, as indicated by
your ISP
.
A VLAN ID might be required if you subscribe to both Internet service and
IPTV service. If your ISP did not provide you with a VLAN ID, leave the
Use
VLANID check box cleared, which is the default setting.
For information about setting up VLAN tag groups, see Set Up a Bridge for
a VLAN Tag Group on page 202.
Priority (802.1p) If your ISP provided you with a VLAN ID and a priority value, enter the
priority value, which is a number from 0 to7.
You can enter a priority value only in combination with a VLAN ID. If your
ISP did not provide you with a priority value, leave the default setting (0).
Encapsulation For a PPP over Ethernet (PPPoE) connection, select PPPoE from the
menu.
Note: PPP over ATM (PPPoA) is not supported for a cable or fiber
connection.
Login Enter the login name that you use to log in to your Internet service, as
indicated by your ISP
.
This login name is often an email address.
Password Enter the password that you use to log in to your Internet service, as
indicated by your ISP
.
Service Name (If Required) Enter the service name that you use to log in to your Internet service, as
indicated by your ISP.
Often, a service name is not required.
Connection Mode Select how the Internet connection functions:
• Always On
. Once the Internet connection is established, it remains on.
This is the default setting.
• Dial on Demand. When someone attempts to connect to the Internet,
the Internet connection is established. When the idle time-out period
expires, the Internet connection is terminated.
• Manually Connect.
Y
ou must connect to the Internet manually (see
View, Renew, or Release a TCP/IP Internet Connection on page 235 or
View, Connect, or Disconnect a PPPoE or PPPoA Internet Connection
on page 237
).
Field Description