Filter
Top Products
Manage the Modem Router and Monitor the Traffic
249
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
7. In the Allow Remote Access By section, specify the external IP addresses to be allowed to
access the modem router’s remote management.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
Select one of the following radio buttons and configure the options accordingly:
• T
o allow access from a single IP address on the Internet, select the Only This
Computer radio button. Enter the IP address to be allowed access.
• To allow access from a range of IP addresses on the Internet, select the IP Address
Range
radio button. Enter a beginning and ending IP address to define the allowed
range.
• T
o allow access from any IP address on the Internet, select the Everyone radio
button.
This radio button is selected by default.
8. Specify the port number for accessing the web management interface.
The default port number is 8443, which is a common alternate for HTTPS. For greater
security, enter a custom port number for the remote web management interface. Choose
a number from 1024 to 65535, but do not use the number of any common service port.
9. Click the Apply
button.
Your settings are saved.
To use remote access:
1. Launch an Internet browser on a computer that is not on your home network.
2. Enter your modem router’
s W
AN IP address into your browser’s address or location field
followed by a colon (:) and the custom port number.
For example, if your external address is 100.168.110.147 and you use port number 8443,
enter https://100.168.110.147:8443
in your browser.
Configure the Modem Router as a DSL Modem Only
By default, the modem router functions both as a modem and a router. You can change the
operation mode to a mode in which the modem router functions as a DSL modem only with
the routing, firewall, wireless support, and traffic meter features disabled.
A typical use of such a mode is when the modem router is used for DSL connectivity only
behind a router, firewall, or security device manager that provides routing, firewall, wireless
support, and traf
fic meter features.
To configure the modem router as a DSL modem only:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www
.routerlogin.net.