NETGEAR D6400 Network Router User Manual


 
Manage the Internet Settings Manually
62
AC1600 WiFi VDSL/ADSL Modem Router Model D6400
7. Enter the VDSL settings as described in the following table.
Field Description
Select Country Select the country in which you use the modem router.
Select Internet Service
Provider
Select the Internet service provider (ISP) that you are using.
If your ISP is not in the menu, select Other.
Transfer Mode For a VDSL connection, select PTM.
DSL Mode When you select PTM from the T
ransfer Mode
menu, the only option in the
DSL Mode menu is VDSL.
Enable This Interface Make sure that WAN1
is selected from the menu and that the Enable This
Interface check box is selected. These are the default settings.
Note: For information about interface WAN2, see Enable the WAN2
Interface for IPTV on page 197.
Multiplexing Method
These settings are disabled because they do not apply to a VDSL
connection.
VPI
VCI
Use VLANID Select the
Use VLANID check box and enter the VLAN ID, as indicated by
your ISP
.
A VLAN ID might be required if you subscribe to both Internet service and
IPTV service. In some unusual situations, a VLAN ID is required for VDSL
Internet service. If your ISP did not provide you with a VLAN ID, leave the
Use VLANID
check box cleared, which is the default setting.
For information about setting up VLAN tag groups, see Set Up a Bridge for
a VLAN Tag Group on page 202.
Priority (802.1p) If your ISP provided you with a VLAN ID and a priority value, enter the
priority value, which is a number from 0 to7.
You can enter a priority value only in combination with a VLAN ID. If your
ISP did not provide you with a priority value, leave the default setting (0).
Encapsulation For a PPP over Ethernet (PPPoE) connection, select PPPoE from the
menu.
Note: PPP over ATM (PPPoA) is not supported for a VDSL connection.
Login Enter the login name that you use to log in to your Internet service, as
indicated by your ISP
.
This login name is often an email address.
Password Enter the password that you use to log in to your Internet service, as
indicated by your ISP
.
Service Name (If Required) Enter the service name that you use to log in to your Internet service, as
indicated by your ISP.
Often, a service name is not required.