NETGEAR UTM50-100NAS Network Hardware User Manual


 
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
5-16 Firewall Protection
v1.0, January 2010
To access the DMZ WAN Rules screen:
1. Select Network Security > Firewall from the menu. The Firewall submenu tabs appear.
2. Click the DMZ WAN Rules submenu tab. The DMZ WAN Rules screen displays. (Figure 5-5
shows a rule in the Outbound Services table as an example).
To make changes to an existing outbound or inbound service rule:
In the Action column to the right of to the rule, click on of the following table buttons:
Edit. Allows you to make any changes to the rule definition of an existing rule. Depending on
your selection, either the Edit DMZ WAN Outbound Service screen (identical to Figure 5-6 on
page 5-17) or Edit DMZ WAN Inbound Service screen (identical to Figure 5-7 on page 5-18)
displays, containing the data for the selected rule.
Up. Moves the rule up one position in the table rank.
Down. Moves the rule down one position in the table rank.
To delete or disable one or more rules:
1. Select the checkbox to the left of the rule that you want to delete or disable or click the Select
All table button to select all rules.
Figure 5-5