Filter
Top Products
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Virtual Private Networking Using SSL Connections 8-23
v1.0, January 2010
Adding Servers and Port Numbers
To configure port forwarding, you must define the IP addresses of the internal servers and the port
number for TCP applications that are available to remote users.
To add a server and a port number:
1. Select VPN > SSL VPN from the menu. The SSL VPN s submenu tabs appear, with the
Policies screen in view.
2. Click the Port Forwarding submenu tab. The Port Forwarding screen displays.
(Figure 8-14 shows some examples.)
3. In the Add New Application for Port Forwarding section of the screen, specify information in
the following fields:
• IP Address. The IP address of an internal server or host computer that a remote user has
access to.
• TCP Port. The TCP port number of the application that is accessed through the SSL VPN
tunnel. Table 8-7 on page 8-24 lists some commonly used TCP applications and port
numbers.
Figure 8-14