Filter
Top Products
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
7-54 Virtual Private Networking Using IPsec Connections
v1.0, January 2010
7. Click on the disk icon to save the configuration, or select File > Save from the Security Policy
Editor menu.
8. In the left frame, click Security Policy. The screen adjusts.
ID Type From the pull-down menu, select Domain Name. Then, below, enter the
remote FQDN that you specified in the UTM’s Mode Config IKE policy. In this
example, we are using utm25_remote.com.
Secure Interface
Configuration
Select Preferred from the Virtual Adapter pull-down menu.
Internet Interface Leave the default setting, which is the Any selection from the Name pull-down
menu.
Figure 7-30
Table 7-18. Security Policy Editor: My Identity, Mode Config Settings (continued)
Setting Description (or Subfield and Description)