Filter
Top Products
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
4-10 LAN Configuration
v1.0, January 2010
4. Click Apply to save your settings.
Enable LDAP
information
(continued)
Search Base The search objects that specify the location in the directory
tree from which the LDAP search begin. You can specify
multiple search object, separated by commas. The search
objects include:
• cn (for common name)
• ou (for organizational unit)
• o (for organization)
• c (for country)
• dc (for domain)
For example, to search the Netgear.net domain for all last
names of Johnson, you would enter:
cn=Johnson,dc=Netgear,dc=net
port The port number for the LDAP server. The default setting is
zero.
DNS Proxy
Enable DNS Proxy This is optional. Select the Enable DNS Proxy radio button to enable the UTM to
provide a LAN IP address for DNS address name resolution. This setting is
disabled by default.
Note: When you deselect the Enable DNS Proxy radio button, the UTM still
services DNS requests that are sent to its LAN IP address unless you disable
DNS Proxy in the firewall settings (see “Attack Checks” on page 5-27).
Inter VLAN Routing
Enable Inter VLAN
Routing
This is optional. Select the Enable Inter VLAN Routing radio button to ensure
that traffic is routed only to VLANs for which inter VLAN routing is enabled. This
setting is disabled by default. When the Enable Inter VLAN Routing radio button
is deselected, traffic from this VLAN is not routed to other VLANs, and traffic from
other VLANs is not routed to this VLAN.
Note: Once you have completed the LAN setup, all outbound traffic is allowed and
all inbound traffic is discarded except responses to requests from the LAN
side. To change these default traffic rules, see Chapter 5, “Firewall Protection.”
Table 4-1. VLAN Profile Settings (continued)
Setting Description (or Subfield and Description)