NETGEAR UTM50-100NAS Network Hardware User Manual


 
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
Firewall Protection 5-41
v1.0, January 2010
Setting a Schedule to Block or Allow Specific Traffic
Schedules define the timeframes under which firewall rules may be applied. Three schedules,
Schedule 1, Schedule 2 and Schedule3 can be defined, and any one of these can be selected when
defining firewall rules.
To set a schedule:
1. Select Network Security > Firewall Objects from the menu. The Firewall Objects submenu
tabs appear, with the Services screen in view.
2. Click the Schedule 1 submenu tab. The Schedule 1 screen displays.
3. In the Scheduled Days section, select one of the following radio buttons:
All Days. The schedule is in effect all days of the week.
Specific Days. The schedule is active only on specific days.To the right of the radio
buttons, select the checkbox for each day that you want the schedule to be in effect.
4. In the Scheduled Time of Day section, select one of the following radio buttons:
All Day. The schedule is in effect all hours of the selected day or days.
Figure 5-25