Filter
Top Products
OmniTek XR User Guide, Software Release 2.3 Page 103
Playback
Where the Advanced Audio option is installed, OmniTek XR has the ability to route any
stereo pair of PCM audio channels to the sound output of the system on which OmniTek
XR is currently being run. Where OmniTek XR also includes the External Audio option,
the sound can alternatively be played back from a pair of AES channels.
To select the stereo pair to play, click on the required pair in the Embedded Audio PPMs
display or the AES Audio PPMs display (as appropriate). The selected channel pair is
then highlighted to show that it has been selected. You also need to check in the Audio
Configuration dialogue associated with the selected PPM window that this channel pair is
not set to be decoded as Dolby-E.
The sound output used and the volume of this audio output are set by the controls built
into the system unit, i.e. under operating system control.
Lissajous Window
Where the Advanced/External Audio option is installed, the phase relationship between a
selected channel pair can be displayed as a Lissajous figure in the separate Audio
Lissajous window.
This window called up either from the Window menu or by clicking on the Lissajous icon
on the main toolbar.
The channel pair used to form the Lissajous figure is selected by clicking on the required
pair in the Embedded Audio PPMs display or the AES Audio PPMs display (where
appropriate).