Filter
Top Products
OmniTek XR User Guide, Software Release 2.3 Page 85
Data Displayed
Status Parameters
Format
Shows what video standard the unit has been set to (if standard has been manually set)
or what standard has been detected (if auto detect selected).
Digital input – OK, Missing or Wrong Format
Both the text of the status message and the colour of that text are used to provide status
information, as follows:
Serial input is good, and is being used as lock reference.
Serial input is good, but is not being used as lock reference.
Serial input is not connected, and is being used as lock reference.
Serial input is not connected, and is not being used as lock reference.
Serial input is connected, and is trying to use as lock reference, but is
failing – perhaps because it does not match the current standard.
Serial input is connected, but is either bad, or does not match the
current standard. The serial input is not being used as lock reference.
Picture : Motion content – Active/Frozen
The warning message can occur instantly, or after the condition has occurred for greater
than a set period. This can be adjusted in the Picture section of the Engineering Settings
control window.