Filter
Top Products
OmniTek XR User Guide, Software Release 2.3 Page 93
Note: These values are also automatically set to pre-defined standard values when a different
graticule type is selected, so again it is important to ensure that the required graticule
type is selected before making any adjustments to these reference levels.
Group/Pair/Channel Labels
These sections allow each group/pair/channel that is displayed to be assigned a name,
which will appear at the top of that part of the display.
Decode Type
OmniTek XR is usually able to determine automatically whether a channel is handling
PCM audio or Dolby-E data. The default is Auto and there is generally no need to
change this. However the drop down menus can be used to specify with Embedded
(PCM) audio or Dolby-E audio if required.
Visible Groups
The Visible groups/pairs section controls which audio channels are shown in the Audio
window.
Surround Sound View
The Surround sound view check box switches the PPM display from showing pairs of
channels to showing the components as either a 5.1 or a 7.1 surround signal and
showing the conventional names for that display. In the first case, only the first six meters
will be active.
This view can also be enabled/disabled directly from the Options menu.
The labelling used in the Surround Sound View display and the allocation of channels to
Surround Sound channels are both configurable. They may both be defined by clicking
the Configure Surround Sound View button and making the required settings in the
dialogue that is displayed.