Filter
Top Products
AT Command Set and S-Registers
5-73910-A2-GN32-30 November 1996
Table 5-2
(3 of 3)
391x Series AT Commands
AT
Command
DCP LCD
Command
Sequence
Description
O Return to Online or Data Mode. Returns modem to Data mode from
Online Command mode.
None
P Pulse Dial. Sets the modem for Pulse Dial mode. Configure\Edit\
Line Dialer
NOTE: Pulse Mode is disabled in Denmark and Sweden.
Table 5-3
(1 of 8)
391x Series AT Commands
AT
Command
Description
DCP LCD
Command
Sequence
Q
n
Result Codes.
Q0 Enables modem to send result codes to the DTE.
Q1 Disables modem from sending result codes to the DTE.
Q2 Enables in Originate mode only for modem to send result codes to
the DTE. Required for most UNIXr applications.
Configure\Edit\
DTE Dialer
S
n=r
Change S-Register. Changes contents of S-Register (where
n
is the
S-Register, and
r
is the new value).
None
S
n
? Display S-Register. Displays value of S-Register where
n
is the
S-Register number.
None
T Tone Dial. Sets the modem for tone dial mode. Configure\Edit\
Line Dialer
V
n
Result Codes Format.
V0 Displays result codes in Number (1) format (digits).
V1 Displays result codes as text.
V2 Displays result codes in Number (2) format (digits).
Configure\Edit\
DTE Dialer