Filter
Top Products
COMSPHERE 3900 Series Modems
3-14 November 1996 3910-A2-GN32-30
Quick Configuration Display
The Quick Configuration display indicates the basic operational characteristics of the modem.
F1
Leased:19.2
Status Configure
F2
F3
To access the Quick Configuration display from the Top-Level display
, press the
key
.
F1
Leased:19.2
abbb cdd ee ffff
F2
F3
The modem’s Quick Configuration information appears on the LCD’s bottom line.
a Displays the network position of the modem. The letter C indicates this is a
control modem, and T indicates this is a tributary modem.
bbb Displays the network management address of the modem. The valid address
field range is from 001 to 256.
c Displays the DTE mode. The letter A indicates the modem is in Asynchronous
mode, and S indicates the modem is in Synchronous mode.
dd Displays the line mode. The letters LA indicate Leased Answer mode, LO
indicate Leased Originate mode, and D indicates Dial mode.
ee Displays the modem DTE port that is currently being displayed by the EIA
status indicators on the DCP.
P1 indicates Port 1.
CC
indicates Control Channel.
DC
indicates Diagnostic Channel.
ffff Displays the modem’s modulation scheme as shown below:
V32t indicates
V
.32 terbo modulation.
V32b
indicates V
.32bis modulation.
V32
indicates V
.32 modulation.
TMp indicates Trellis Multipoint modulation.
V22b
indicates V
.22bis modulation.
V27b
indicates V
.27bis modulation.
V33
indicates V
.33 modulation.
V29
indicates V
.29 modulation.
V22
indicates V
.22 modulation.
V23
indicates V
.23 modulation.
V21
indicates V
.21 modulation.
212A
indicates Bell 212A modulation.
103J
indicates Bell 103J modulation.
To exit the Quick Configuration function and return to the Top-Level menu, press the , , or
key
.