Filter
Top Products
DCP Operation
3-253910-A2-GN32-30 November 1996
The LCD displays the first sequence fault field. (Sequence fault fields range from 1 to 8 and are
identified by a number in the upper right corner.) Press the
key to view the remaining fields.
The message
Modem O.K.
appears if no sequence faults have occurred.
To remove sequence fault records from both the LCD and nonvolatile memory
, select Clear
. The
message
Modem O.K.
appears.
To exit this function and remain in the Status branch, press the
key
. To exit and return to the
Top-Level menu, press the
key
.
Configure Branch
The Configure branch of the LCD allows you to change and save the modem’s configuration
options. For configuration options and DCP configuration procedures, refer to Chapter 4, DCP
Configuration.
Poll List Branch
The Poll List function is not available on Point-to-Point control modems or Multipoint
Tributary modems..
The Poll List (Plist) branch of the Top-Level menu allows you to identify downstream modems in
order to support health and status polling and download broadcasting. The maximum number of
devices is 32 on the secondary channel and 64 on the diagnostic channel.
“Status”
Status Configure
Control
Test SubHS Call_Setup Tlk/Data Security Remote
PList
(Tributary
o
nly)
Display Clear Change Add Acquire
Active
Delete
Skip