DCP Operation
3-413910-A2-GN32-30 November 1996
F1
Warning:Download
Abort_Download
F2
F3
At this point, if you do not want to continue this process, abort the transfer by selecting any
function key. This returns the modem to the DwnLoadSoftware menu. However, to continue with
the transfer
, press the
key to display the Reprogram_Remote selection.
F1
Warning:Download
Reprogram_Remote
F2
F3
Press any function key to begin the transfer.
F1
RemClone Status
Establish Remote
F2
F3
The local modem’
s LCD displays Establish Remote, indicating the modem is attempting to
establish a Remote Cloning Download session with the remote modem.
If unsuccessful, the modem remains in the Download Transfer mode. The LCD’
s top line displays
RemClone Failed
and the bottom line displays one of the following messages:
Incompat Modulat The modems are connected, but are using a modulation scheme other
than V
.33, V.32 terbo, V
.32bis, V
.32, V.29, or TMp.
No Response
The remote modem is not a 3900 Series modem or the connection
between the two modems is poor
.
Access Disabled
The remote modem’
s Access from Remote configuration is disabled.
Password Invalid
The local and remote modems’ passwords do not match. Correct the
problem and attempt another download from the local modem. If this
fails, contact your service representative.
No Cir
cuit There is no connection between the local and remote modem.
After successful establishment of a Remote Cloning Download session, the following screens
appear.
F1
RemClone Status
Initializing
F2
F3