Filter
Top Products
COMSPHERE 3900 Series Modems
3-32 November 1996 3910-A2-GN32-30
T
o access Reset from the Control branch, make the following selection:
F1
Control: >
Speaker Reset
F2
F3
Select Reset.
The message
Reset appears momentarily before the modem performs the power
-up diagnostic test
sequence.
Data Stream
The Data Stream function is not available in Async mode.
Use Data Stream to enable or disable the modem’s data transmitter function.
To access Data Stream from the Control branch, make the following selections:
F1
Control:
Data_Stream
F2
F3
Press the
key until Data_Stream appears. Select Data_Stream.
The Data Stream action which is available (Disable or Enable) appears on the second line of the
LCD beside the word Port1. If the modem’s data transmitter is enabled, the word Disable
appears
to indicated that you may disable the data transmitter by selecting this action.
F1
Data Stream
Port1 Disable
F2
F3
If you want to disable the modem’
s data stream, press the F2 key
. When the message
Command
Complete
appears, press the
key to clear the message.
F1
Data Stream
Port1 Enable
F2
F3
Press the F2 key again to enable the modem’
s data stream.