Filter
Top Products
COMSPHERE 3900 Series Modems
5-8 November 1996 3910-A2-GN32-30
Table 5-3
(2 of 8)
391x Series AT Commands
AT
Command
DCP LCD
Command
Sequence
Description
X
n
Extended Result Code, Dial Tone Detect, and Busy Tone Detect
Configuration Options.
Extended Dial
T
one
Busy T
one
Result Code:
Detect: Detect:
X0 Disable Disable Disable
X1 Enable Disable Disable
X2 Enable Enable Disable
X3 Enable Disable Enable
X4 Enable Enable Enable
X5 Add/EC Enable Enable
X6 Add/V42.MNP Enable Enable
X7 Use DTE Rate Enable Enable
Extended
Result Code:
Configure\Edit\
DTE Dialer
Dial Tone
Detect:
Configure\Edit\
Line Dialer
Busy Tone
Detect:
Configure\Edit\
Line Dialer
Extended Result Code:
Enable Displays all result codes listed in Table 5-1 except for
error control suffix.
Disable Only displays OK, CONNECT, RING, NO CARRIER,
ERROR
ERR
O
R.
Add/EC Displays result codes with /EC suffix.
Add/V42,MNP Displays result codes with V.42 or MNP suffix.
Use DTE Rate Displays DTE data rate instead of line rate.
Dial Tone Detect:
Enable Sets the modem for dial tone detect
E
na
bl
e
S
e
t
s
th
e mo
d
em
f
or
di
a
l
t
one
d
e
t
ec
t
.
Disable Sets the modem for blind dialing.
NOTE: It may not be possible to disable Dial Tone Detect in some
countries.
Busy Tone Detect:
Enable Modem monitors for busy tone.
Disable Modem ignores busy tone.
Y
n
Long Space Disconnect.
Y0 Disable. Ignores long space.
Y1 Enable. Disconnects if long space is detected. Enables
transmission of a long space.
Configure/Edit/
Line Dialer