Filter
Top Products
COMSPHERE 3900 Series Modems
3-12 November 1996 3910-A2-GN32-30
Table 3-3
(4 of 4)
Top-Level Menu Status
Status IndicatesMessage
Firmware
Download
Result
Cont.
Remote Clone
OK
A remote cloning of firmware was successful. This message
appears on the local modem’s LCD.
Bcast Clone
Done
A broadcast cloning of firmware has completed. You must look
under the Control branch for cloning results. This message appears
on the local modem’s LCD.
AT Command
Reset
Reset by AT
command
The modem has performed a reset in response to an ATZ
command.
Messages listed in Table 3-4 are common operational messages that occur during modem
operation. These messages normally appear on the second line of the LCD.
Table 3-4
Common Operational Messages
Common
Operational Message
Indicates
Please Wait... A command to a local device takes more than two seconds to complete.
Command Sent... A command is sent to a remote modem.
No Rem Response or
Remote Modem Fail
A remote modem does not respond to a command within 5 seconds.
Command Complete A command, issued to a local or remote modem, is completed.
Invalid Command The modem cannot complete a command.