Filter
Top Products
DCP Operation
3-553910-A2-GN32-30 November 1996
Call_Setup
“Status”
Status Configure PList Control Test
SubHS
Tlk/Data Security Remote
Dial
Disconnect
Answer
Dial_Standby
or
Return_to_Dial
Change_Directory
(Dial
B
ackup
o
nly)
Director
y L
ocation
s 1 - 2
4
Directory_Status
(Does not appear
in North America)
To access the Call Setup branch from the Top-Level menu, make the following selections:
F1
Leased:19.2
Call_Setup
F2
F3
Press the
key until Call_Setup appears. Select Call_Setup.
Dial
For dial backup applications, Dial allows you to dial any telephone number stored in directory
locations 1–24. Any telephone number dialed using the DCP must already exist in a directory
location. Refer to
Change Dir
ectory for information on storing telephone numbers in directory
locations.
For leased backup applications, Dial allows you to switch to the backup leased line. Any directory
location may be used. The remote modem cannot automatically answer the simulated call. Use the
Answer function of the remote modem in conjunction with the Dial function to manually switch to
the backup leased line.
To access Dial from the Call Setup branch, make the following selection:
F1
Call Setup: >
Dial Disconnect
F2
F3
Select Dial to display the first directory telephone number.