Filter
Top Products
DCP Operation
3-393910-A2-GN32-30 November 1996
• For Multiple download configurations, ensure that the control modem’
s active poll list
contains all the network management addresses for the remote tributary modems that will
receive the download (refer to the Poll List
section in this chapter), and ensure that the
tributaries are responding properly to polls (refer to the
Sub-Network Health and Status
Branch section in this chapter).
Cloning a Single TMp Remote
F1
Choose DLL Type >
Single Multiple
F2
F3
Press
the F1 key to select Single Clone Remote.
F1
Choose Address:
Ent "x
xx
F2
F3
The address field (xxx) displays the network management address of the modem that will receive
the download. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
and
keys to position the cursor
( _ ) under the digit that will be incremented. Press the F2 (") key to increment the digit.
Press Enter (Ent) to select the modem that will receive the download.
F1
Choose Password:
Ent "y
yyyyyyy
F2
F3
The password field (yyyyyyyy) displays the remote access password for the modem that will
receive the download.
To increment digits within the password field (yyyyyyyy), use the
and
keys to position the
cursor ( _ ) under the digit that will be incremented. Press the F2 (
"
) key to increment the digit.
Press Enter (Ent) to select the modem that will receive the download.
After completing these actions, proceed to the section titled Implementing a Clone Remote
Operation.