Filter
Top Products
DCP Operation
3-273910-A2-GN32-30 November 1996
If
there are modems in the poll list when you select Display
,
xxx
Displays the network management address of the modem in the poll list.
yyyyyy Displays either Active or Skip to indicate the poll list in which the network
management
address is included.
Select Nxt to scroll through the entries in the Active or Skip poll lists.
To exit this function and remain in the PList Display branch, press the
key
. To exit and return
to the Top-Level menu, press the
key
.
Clear
The Clear function does not appear in Remote mode.
Clear deletes the modem’
s poll list.
To access Clear from the PList branch, make the following selection:
F1
Poll List: >
Display Clear
F2
F3
Select
Clear
.
The message
Command Complete appears on the second line of the LCD to indicate that the poll
list has been cleared.
To exit this function and remain in the PList branch, press the
key
. To exit and return to the
Top-Level menu, press the
key
.
Change
The Change function does not appear in Remote.
Change allows you to change the modem’
s poll list.
T
o access Change from the PList branch, make the following selections:
F1
Poll List:
Clear Change
F2
F3
Press the
key until Change appears. Select Change.
Change allows you to add modems to the Active poll list (Active), delete modems from both
Active and Skip poll lists (Delete), and move modems from the Active to the Skip poll list.