Filter
Top Products
Modem Installation
2-113910-A2-GN32-30 November 1996
5. Press the
Select
key to place the SDCP in direct communication with the selected
modem.
The LCD displays the Top-Level menu for the selected modem. In addition, the Front
Panel LED on the modem’
s faceplate and the
OK LED on the SDCP light.
6. Once you have determined that the modem is installed properly and completed its
power-up self-test, rotate the circuit pack lock until it covers the faceplate latch
(Figure 2-3) and tighten the retention screw on the circuit pack lock. This prevents the
modem from accidently being removed once it is installed in a carrier.
7. Configure the modem as described in the
Selecting Factory Configuration Options
section
earlier in this chapter.
Figure 2-3. Circuit Pack Lock