Filter
Top Products
COMSPHERE 3900 Series Modems
3-26 November 1996 3910-A2-GN32-30
To access PList from the Top-Level menu, make the following selections:
F1
Leased:19.2
PList Control
F2
F3
Press the
key until PList appears. Select PList.
Within a network link, a control modem can communicate with a tributary modem by using the
tributary modem’s network management address for polling functions. Each tributary modem must
have a different network management address. Refer to the Misc section in Chapter 4 for a
description of the network management address (NetMngmtAddress) configuration option.
Over a diagnostic channel a tributary modem can communicate with control modems by using the
control modem’s network management address for polling functions.
In the poll list, modems may be listed as either Active or Skip. Modems in the Active poll list are
polled by the upstream modem. Modems in the Skip poll list are passed over during the polling
process, but they are not deleted from the poll list.
Display
Display allows you to view the modem’
s poll list.
To access Display from the PList branch, make the following selection:
F1
Poll List: >
Display Clear
F2
F3
Select
Display
.
NOTE
If there are no modems in the poll list when you select Display, the
message Poll List Empty! appears on the second line of the LCD.
F1
Poll List:Disp
Nxt xxx yyyyyy
F2
F3