Filter
Top Products
10 Pelco Manual C690M-E (11/04)
INSTALLATION
REAR PANEL OVERVIEW
Figure 1. Rear Panel View
1 ON/OFF switch
Use to toggle power on/off to unit.
2 VIDEO IN connectors
These are BNC input connectors for cameras.
3 VIDEO OUT connectors
These are BNC output (looping) connectors for cameras.
4 VIDEO TERMINATION switches
These switches let you select between high impedance (HZ) and 75 ohms.
5 AC power outlet
This socket is for a 100-240 VAC power cord.
6 RS-232C connectors
Communications port 1 (COM1) is used to connect the DX7000EM External Modem for
remote communication.
7 Ethernet port
The primary purpose of this LAN communication port is to view live and recorded video
either directly or through PCs connected to the network. It can also be used for remote
configuration through the network or to connect directly to a PC for local configuration of IP
address. It is also used to upload new versions of software and configurations.
COM 1
COM 2
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
HZ
75
HZ
75
SCS
NC
T
N
NNP R
SOA E
LS
1234
ON
OFF
DEFAULT IP RESET
ALARMS
5 678 9101112 13 14 15 16
REL 1
NCN
OC
NCN
OC
REL 2
MON
OUT
TCP/IP
10/100
D
A
T
A
P
O
R
T
S
1
2
3
4
100-240~
50/60HZ
200 WATTS MAX
1
9
3
2
8
12
6
10
7
11
5
4