Filter
Top Products
36 Pelco Manual C690M-E (11/04)
7. Under Cam. Command, use the pull-down menu to select None, Go Preset (send the
camera to the presets), or Run Pattern (activate a pattern). You set patterns and presets
in live video.
This feature lets you change Spectra or Esprit positions in half-hour increments. The DVR
will process this command continuously during the half hour. While both Spectra and
Esprit incorporate this feature as a home position, the DX2000 lets you select different
positions depending on the time of day.
For example, during the day you want the outside corner mount PTZ camera to look at the
front parking lot, but at night it should cover the loading dock at the side of the building or
run a pattern between both areas.
8. Under Value, use the pull-down menu to select the number of the preset or pattern to run.
9. Toggle the check mark in the Off boxes to turn on or off relay 1 and 2, and enter in the
Duration boxes the number of seconds to keep them on.
10. Click Save to save the values or Cancel to abandon the changes. (The program will ask
you to verify a save at the time you select another item to configure.)