Filter
Top Products
66 Pelco Manual C690M-E (11/04)
7. Under System Information, do the following:
a. Use the pull-down menu in the Default Live Camera field to pick a camera that you
would like to be displayed when the Live Video screen first comes up. If you select
Live Tour, the camera tour feature will start when you access the Live Video page.
b. Click either Server or Client depending on whether you want to see information
about the server or your PC.
8. In the Data Interface heading, checkmark Disable if you do not want to view the data
interface screens.
9. In the Modem Initialization heading, checkmark Auto-Detect if you plan to install an
external modem. The DVR will detect the Pelco DX7000EM Modem automatically. (Other
modems are not recommended nor guaranteed to work. The program will not indicate the
modem works.)
10. The Initialization String entry box will normally be left blank. However, if you plug in an
external modem the DVR cannot detect, you will need to enter a string (from your modem
manual) that the modem recognizes so it can ready itself. (You will have to connect over
Ethernet to enter this string.) Use Pelco modem DX7000EM to avoid this problem.
Note the following:
• Auto answering must be enabled.
• Data compression does not have to be enabled, but enabling it may allow faster
transfers.
•Transfers may be slightly faster with error correction disabled, but may cause glitches
in the displayed video or communication errors.
11. When finished, click Save to save the values or Cancel to abandon.