Filter
Top Products
38 Pelco Manual C690M-E (11/04)
MOTION RECORDING
Use this screen to program motion detection recording.
NOTE:
Motion (as well as scheduled and event) recording is disabled while an alarm is activated.
The priority in recording is contact alarm, motion alarm, contact event, motion event, scheduled
recording.
Do the following:
1. Click the Configuration button. Click Record On Motion Detection. The Record On
Motion Detection screen appears.
2. Click the Enable check box of a camera you want motion detection on.
3. Click the Set Camera button of that camera. The program displays the Set Camera
screen. Refer to Figure 13.
Figure 14. Record On Motion Detection Screen