Filter
Top Products
Pelco Manual C690M-E (11/04) 79
RESETTING CAMERAS
The DX2000 has a reset button that functions just like unplugging a PTZ camera and then
plugging it in again. This lets you see what kind of camera you have and its settings. To do so:
1. Click the Live Video button.
2. Click the button of the PTZ camera you want to reset.
3. Click the Reset button.
ACCESSING CAMERA MENUS
The DX2000 lets you access the internal menus of your cameras that have them. To access
these menus through the DX2000 (equivalent to a Preset 95), do the following:
1. Click the Live Video button.
2. Click the button of the camera whose menu you want to access.
3. Click the Menu button. The camera menu appears.
4. Use the arrow buttons on your keyboard and the Open Iris button on the screen to
maneuver through the menu.
5. To exit, position the cursor at EXIT and click Open.
CHANGING DEFAULT SPEED
Use the on-screen arrow buttons to change the camera’s keyboard controlled panning speed
(higher number for faster, lower for slower). This affects only panning speed for the left/right
keyboard arrow keys and does not change the mouse panning speed. Proportional speed, if
any, is not affected.
ACTIVATING AUXILIARIES
Use the Aux On/Off buttons to turn on and off the camera’s auxiliary. Use the on-screen
number pad if the camera has more than one auxiliary.