Filter
Top Products
50 Pelco Manual C690M-E (11/04)
d. Under Cam. Command, if desired use the pull-down menu to select None, Go
Preset (send the camera to the presets), or Run Pattern (activate a pattern). You set
patterns and presets in live video.
This feature lets you run a pattern or go to a preset based on a data event. You can
reset Spectra or Esprit positions in half-hour increments. The DVR will process this
command at the beginning of each half hour. While both Spectra and Esprit incorpo-
rate this feature as a home position, the DX2000 lets you select different positions
depending on the time of day.
For example, during the day you want the outside corner mount PTZ camera to look
at the front parking lot, but at night it should cover the loading dock at the side of the
building or run a pattern between both areas.
e. Under Value, if desired use the pull-down menu to select the number of the preset or
pattern to run.
f. Click the Save button. The program returns you to the Record On Data screen.
5. Under the Duration heading, use the pull-down menu to select the number of seconds
that recording will continue.
6. Click Save to save the values or Cancel to abandon.
Refer to the
Disk Allocation/Disk Partitions
section for information on partition setup information.