Filter
Top Products
C1534M (1/06) 15
Device Icon Labels
Icon labels are provided for each device installed in the system.
Figure 8. Device Configuration Diagram Icon Label
Move a Label
1. Click the label.
2. Drag it to a new position.
Change Label Orientation
1. Right-click a label to turn it 90 degrees counterclockwise.
2. Right-click again until the label is at the desired orientation.
Edit a Label
A device label reflects the name selected when the device is added to the system. To change the device label, change the device name in
the device Properties, as described in the Changing Device Settings section.
View/Hide Labels
Select View > Labels from the menu bar; in the submenu, click the desired device type to view or hide all labels for that device type. The check
mark beside the item indicates that the label is visible.
Device Inventory
To define devices without adding them to the current configuration diagram, use the Device Inventory. The Device Inventory provides a means of
saving the specific installation details of any device within the system without adding it to the device configuration diagram.
Opening the Device Inventory
1. Select Edit > Device Inventory > Open from the Device Configuration window menu bar.
Alternate Step 1
Right-click the device configuration diagram, and then select Device Inventory > Open.
2. The Device Inventory window appears.
Figure 9. Device Inventory Window
The Device Inventory includes all devices shown on the device configuration diagram, plus any devices that have been added directly to the
inventory without including them on the diagram. The column on the right side of the Device Inventory window, labeled “In Use,” indicates
whether the device is included in the device configuration diagram (“Yes” or “No”).