Filter
Top Products
IGP/PGL Submenu (with LG)
135
Select LPI
This is the number of lines to be printed per inch. For example, at 6
lpi there is 1/6 inch from the top of one print line to the top of the
next print line. The options are:
• 6.0 (default)
• 8.0
• 9.0
• 10.0
Auto Uppercase
This parameter enables the printer to print text in all uppercase
when using the ALPHA command.
• Disable (default). The printer will print text in upper and
lowercase.
• Enable. The printer will print text in uppercase only.
Skip Cmd Prefix
This parameter determines if the printer will print any data before a
PGL command is received.
• Enable (default). The printer ignores all data on the current line
before an IGP command.
• Disable. The printer will print all data on the current line before
an IGP command.
Forms Handling
This submenu allows the user to handle the form in the following
ways:
• Disable (the default). No effect.
• Auto Eject. Automatically ejects a page at the end of the job to
spill out the last page.
• Auto TOF. Automatically does a form feed (FF) at the end of
each form to the next top of form.
IGP/PGL Submenu