Filter
Top Products
Serial Matrix Emulation
233
Define CR Code
This option controls the action of the printer when it receives a
Carriage Return code (hex 0D) from the host computer. If this
feature is enabled, each time the printer receives a Carriage
Return, it inserts an additional Line Feed code (hex 0A) into the
data stream. Do not use this feature if the host computer sends line
feeds to the printer.
• CR = CR (default). Does not insert an extra line feed after each
carriage return.
• CR = CR + LF. Inserts an extra line feed after each carriage
return. The next print position will be print position 1 of the next
line.
Auto LF
The Auto LF option defines the printer action when print data is
received past the forms width setting.
• Enable (default). Performs an automatic carriage return and
line feed when data is received past the forms width.
• Disable. Discards any data past the forms width.
Overstrike
This option enables you to print bold characters.
• Enable (default). Turns on bold print. When enabled, overstrike
printing slows down the printer.
• Disable. Turns off bold print.
Define LF Code
• LF = LF (default). Does not perform an automatic carriage
return when a line feed command is received. The next print
position will be the current print position of the next line.
• LF = CR + LF. Forces an automatic carriage return with each
line feed command received. The next print position is print
position 1 of the next line.