Filter
Top Products
Chapter 4 Coax/Twinax (CTHI) Emulation
178
Translate Table
Defines which translate table to use for printing.
• Default (default). Translates data by using the default table of
the current character set.
• Downloaded. Translates data from EBCDIC to internal code
by using the downloaded translate table.
Host Override
Determines whether the printer accepts certain commands sent by
the host or continues to use the current operator panel settings.
• Disable (default). Allows the following host commands to
override operator panel settings: line length, forms length, lines
per inch (LPI), characters per inch (CPI), print quality, and text
orientation. Note the information appearing on the message
display may not match the data stream setting. No values will
change upon initial selection of the disable option.
• Enable. The operator panel settings override the host
commands.
Format Control
Enables the printer to reflect the same spacing as CTPC model
printers after absolute and relative move commands are executed.
• Disable (default). Reflects distance, generated by the IGP/VGL
feature, IGP/PGL feature, and Hex Transparent control code
sequence, in the new position (after horizontal and vertical tabs
are executed).
• Enable. Does not reflect distance, generated by the IGP/VGL
feature, IGP/PGL feature, and Hex Transparent control code
sequence, in the new position (after horizontal and vertical tabs
are executed).