Filter
Top Products
Epson FX Emulation
253
Define CR Code
The Define CR Code option controls the action of the printer when it
receives a Carriage Return code (hex 0D) from the host computer.
If this feature is enabled, each time the printer receives a carriage
return, it inserts an additional Line Feed code (hex 0A) into the data
stream. Do not use this feature if the host computer sends line
feeds to the printer.
• CR = CR (default). No extra line feeds are inserted.
• CR = CR + LF. Inserts an extra line feed after each carriage
return.
Auto LF
Defines the printer actions when print data is received past the form
width setting.
• Disable (default). Discards any data past the form width.
• Enable. Performs an automatic carriage return and line feed
when data is received past the form width.
Define LF Code
Controls the action of the printer when it receives a Line Feed code
(hex 0A) from the host computer. If this feature is enabled, each
time the printer receives a line feed, it inserts an additional carriage
return code (hex 0D) into the data stream. This feature can be used
in most installations, but it is required if the host computer does not
send carriage returns to the printer.
• LF = CR + LF (default). Adds an extra carriage return with each
line feed.
• LF = LF. Does not add a carriage return with a line feed.
ANSI Emulation