Filter
Top Products
Chapter 4 PRINTER CONTROL
278
• Form Saver. Allows near demand printing for forms that do not
have pre-printed headers or special application designs. At
least one blank page is required to load the paper so that it
does not slip out of the tractors. For shorter form lengths, two or
more blank pages may be necessary. When you press
VIEW/EJECT, the bottom of the printed page is slewed to the
tear position. When pressed again, the paper moves to the top
of the next printable page available. See “Demand Printing” on
page 329 for detailed information on Form Saver.
• Out 3 Back 2. A page eject command moves to top-of-form
three times then positions backward for two pages, giving the
effect of a single page eject.
• Out 4 Back 2. A page eject command moves to top-of-form
four times then positions backward for two pages, giving the
effect of a single page eject.
• Disable. Prevents the use of the eject function.
Open Platen @ BOF (Bottom of Form)
Some special forms have perforation areas that are too thick to
pass through the print station. This parameter, when enabled,
opens and closes the platen when the perforations move across the
platen. When enabling this parameter, you must set the forms
length to match the physical distance between perforations.