Filter
Top Products
Chapter 4 Coax/Twinax (CTHI) Emulation
174
Usr Defined HTRN
This option is used in Twinax SPC emulation. The range is ASCII
character. This option allows users to define ther own lead-in
characters for the Printronix Specific commands. Select a hex
value for the following codes for the User Defined option:
• Start Code 1 5F
• Start Code 2 5F
• Stop Code 5B
Alt. Set 80-9F
• Printable. Prints data in the range of hex 80 through hex 9F.
• Control Code. Interprets data in the range of hex 80 through
hex 9F as a control code.
Change Case
Specifies the font as Mono or Dual case. This option is available
only in non-SCS mode. The host will be notified of the change when
the printer is placed online. Mono Case prints the same as Dual
Case if the character set is one of the following “right to left” sets:
Katak., Hebrew, Old Hebrew, and Farsi. The default is Dual Case.
SCS (System Network Architecture Character String) mode is
controlled by the host computer.
Set Text Orientn
Specifies the direction in which characters are printed on the page.
This allows the printer to print languages which are printed right to
left instead of left to right.
• Control By Host (default). Allows printers configured as a
4234 to use the “Set Text Orientation” command from the host.
• Left to Right.
• Right to Left. When a right to left language is selected, the
host will be notified of print direction changes when the printer
is placed online.