Filter
Top Products
Control Panel Keys
31
JOB SELECT
In offline mode, this key allows you to change the active
configuration if multiple configurations have been saved or the
typeface of the printer.
ENTER
When navigating the configuration menus, ENTER selects the
currently displayed option value as the active value. An asterisk (*)
appears next to the active value on the display. ENTER is also
used for starting and stopping printer tests and generating a
configuration printout.
NOTE: The ENTER key must be unlocked in order to function.
See UP + DOWN, below.
The ENTER key lock and unlock function can be
configured to be a key combination other than
= + >
(see page 288).
UP or DOWN (
= or > )
Moves up or down between levels in the configuration menus and
makes vertical forms adjustment. After pressing VIEW, press
= or
> to adjust the paper up or down in 1/72 inch increments for fine
vertical forms alignment. When the printer is in offline mode, press
= or > to move through levels in the configuration menus.
UP + DOWN (
= + > )
Locks and unlocks the ENTER key.
NOTE: The ENTER key lock and unlock function can be
configured to be a key combination other than
= + >
(see page 288).