Filter
Top Products
Chapter 4 PCL - II Emulation
268
Page L./Inches
This parameter allows you to set physical page length from 2 to 16
inches, in increments of half an inch. The default is 11 inches.
Config Print
This option prints the emulation's parameters and the currently
selected values.
Symbol Set Print
This option prints a list of all the available sets. The character set
number prints to the left of the character set sample.
Reset Cmd CFG Ld
When the printer receives a host data stream reset command in
addition to resetting printer variables, the selected configuration will
be loaded.
• Power-Up Config (default). The power-up configuration is
loaded when the reset command is received.
• Current Config. If you have preset and presaved multiple
configurations, then the currently selected presaved
configuration is loaded when the reset command is received.
• Disable. The printer ignores the reset command when it is
received and continues to use the currently loaded
configuration.
• Factory Config. The factory installed configuration is loaded
when the reset command is received.