Filter
Top Products
B – Command Reference
Commands
B-20 SN0054628-00 A
Q
dump
Shows cumulative system debug information.
fcptstate
Provides the state of the SCSI target driver.
fcsexch
Provides per port FCS exchange allocation diagnostic.
fcsluns
FCS LUN discovery. Local port database of remote ports with LUNs per remote
port.
fcsstate
Provides a summary table showing how many targets, LUNs, and initiators are
discovered by each port. Each port discovers itself.
fpsdiag
Shows firmware debugging information.
fpspsc
Provides a list of the physical disks in use by the firmware/fastpath.
fpsstats
Shows the firmware/fastpath statistics.
hwstate
Provides the state of the HBA hardware driver.
interrupts
Shows interrupt load.
kdisks
Shows the virtual disks created by the application, remote initiator WWN, port
WWN, LUN identifier, current state, type, and handle.
kdstats
Shows virtual disk I/O statistics, such as number of forwarded commands and the
number of reads handled by the SANbox SSP software.
meminfo
Shows memory usage.
modules
Provides a list of the loaded kernel modules.
ppeinfo
Shows the firmware status.