Filter
Top Products
B – Command Reference
Commands
SN0054628-00 A B-23
Q
Show Fans Command
Displays the status, either OK or Error, and the RPM for all 10 fans in the SANbox
SSP.
Syntax show fans
Notes If the fan is a power supply fan (Fan 1 and Fan 3), the RPM is not available. The
RPM displays as 0 if the fan is not operational; as 1 if the fan is operational.
See Also "Show Fan Command" on page B-22
Show Group Command
Returns the list of user names that belong to the specified group name. The
groups defined for SANbox SSP are Administrator and Monitor.
Syntax show group [group name]
Keywords show group [group name]
Name of the group to which the user belongs: Administrator or Monitor.
Show Groups Command
Returns a list of the users assigned to each group that is defined for this SANbox
SSP. The groups defined for SANbox SSP are Administrator and Monitor.
Syntax show groups
See Also "Show Users Command" on page B-27
Show ID Command
Returns the user account that was authenticated for the current telnet session.
Syntax show id
Show Port Command
Returns diagnostic and status information for the specified port, 1-8 for
SANbox 8200-08 SSP/SANbox 8202-08 SSP or 1-16 for SANbox 8202-16 SSP.
See the sample output in the Examples section, below, for more information.
Syntax show port
[port number]
*