Filter
Top Products
3 – SANbox SSP Management GUI Reference
Navigating the SANbox SSP Management GUI
3-12 SN0054628-00 A
Q
3.2.3
Telnet
The Telnet screen enables you to initiate a telnet session from the SANbox SSP
Management GUI.
To begin a telnet session from the SANbox SSP Management GUI:
1. Click Telnet in the left-most pane.
2. Enter the correct administrative login and password.
The following Telnet screen displays (see Figure 3-9):
Figure 3-9. Telnet Screen Initiated from the SANbox SSP Management GUI
The options in the lower window are:
Reconnect Telnet: Re-establishes a telnet session.
Disconnect Telnet: Disconnects a telnet session.