Filter
Top Products
B – Command Reference
Commands
B-28 SN0054628-00 A
Q
See Also "Disable User Command" on page B-10
"Enable User Command" on page B-11
"Modify User Command" on page B-16
"Show Groups Command" on page B-23
"Show User Command" on page B-27
Show Voltage Command
Returns the nominal and actual voltages for the SANbox SSP. The nominal
voltage is the expected voltage when everything is operating correctly. The actual
voltage is the current voltage.
Syntax show voltage
[voltage number]
[*]
Keywords show voltage [voltage number]
An integer between 1 and 15, inclusive.
show voltage [*]
* specifies all voltages in the SANbox SSP.
See Also "Show Voltages Command" on page B-28
Show Voltages Command
Returns the nominal and actual voltages for the SANbox SSP. The nominal
voltage is the expected voltage when everything is operating correctly. The actual
voltage is the current voltage.
Syntax show voltages
See Also "Show Voltage Command" on page B-28
Version Command
Returns the SANbox SSP version.
Syntax version