Filter
Top Products
SN0054628-00 A B-1
Appendix B
Command Reference
Using the SANbox SSP command line interface (CLI), you can configure and
manage SANbox SSP with common command sets.
This appendix provides a reference for each command in the command line
interface for the SANbox SSP. The commands provide the same functions as the
SANbox SSP Management GUI.
You can access the CLI through either the Local Administrative Console or a telnet
session. This appendix provides the steps for accessing the CLI and describes each
of the commands.
This appendix covers the following topics:
■ Command Line Interface (CLI) Overview
■ Accessing the CLI
■ Commands
B.1
Command Line Interface (CLI) Overview
The SANbox SSP provides a command line user interface through serial, telnet,
and ssh connections. All configuration, maintenance, and monitoring of the SANbox
SSP are accessible through the command line interface.
B.1.1
Command Quick Reference by Object
Table B-1 shows which commands are available for the major object types.
Table B-1. Commands by Object Type
Object Type Command Page
eths Disable Eth Command
Enable Eth Command
Modify Eth Command
Show Eth Command
Show Eths Command
page B-9
page B-10
page B-13
page B-21
page B-22
ports Disable Port Command
Enable Port Command
Modify Port Command
Modify Ports Command
Reset Port Command
page B-9
page B-11
page B-14
page B-15
page B-17