Filter
Top Products
SN0054628-00 A Index-1
Index
A
accessing SANbox SSP for the first time 3-7
accessing the CLI through the serial console
port
3-7
configuring terminal settings on the host
computer 3-7
modifying Ethernet settings for remote
access 3-8
powering up
3-7
audience
1-2
B
BACK-END STORAGE NOT FOUND
(FABRIC/LOOP) problem
statement
7-2
BACK-END STORAGE NOT FOUND BY SVM
problem statement 7-2
boot sets
6-2
installing new release on boot set of the
SANbox SSP 6-4
selecting the active boot set from the local
console 6-2
C
CANNOT ACCESS SANbox SSP CONSOLE
PORT problem statement
7-3
CANNOT LOG INTO SANbox SSP (GUI OR
CLI) problem statement
7-3
Clear command
B-8
command line interface
2-1
accessing
B-4
overview
B-1
SANbox SSP built-in users and groups
B-6
shutting down the SANbox SSP
5-11
using locally
4-5
using remotely
4-5
commands
by object type
B-1
list
B-8
syntax
B-2
connecting to the SAN
connecting hosts
3-11
SANbox SSPs
3-10
StoreAge SVM appliances
3-9
console port connection
2-9, 3-6
contact information
1-7
Create User command
B-8
D
defaults
device frame size
5-7
Telnet login and password
B-5
Delete User command
B-8
device management specifications
A-3
devices
connecting directly to SANbox SSP
5-5
diagnostics
Power-On Self Test (POST)
6-6
SANbox SSP Management GUI Diagnostics
screen
4-11
SANbox SSP Management GUI System
Sensors panel
4-10
Disable Eth command
B-9
Disable Port command
B-9
Disable snmpv3 command
B-10
Disable User command
B-10
documentation
1-2
E
electrical specifications A-3
Enable Eth command
B-10
Enable Port command
B-11
Enable snmpv3 command
B-11