Filter
Top Products
4 – Using the SANbox SSP
Setting up a High-Availability Configuration
4-2 SN0054628-00 A
Q
Storage array At least
1 device
■ Supported RAID device with two or more independent
controllers.
■ All ports are accessible from both SVM appliances.
■ If a dual-controller active/passive RAID is used, the
SANbox SSPs must be cross-connected with the
controllers, which means that each SANbox SSP must
see both controllers in the RAID.
Fibre Channel
switches
or
Director-class
switch
2 or more
■ Supported Fibre Channel switch.
1
■ High availability
■ Multiple zones
a
See the SANbox SSP release notes for the list of supported hardware including host
operating systems, HBAs, storage, and FC switches.
Table 4-1. Required Configuration for the Components
of a High-Availability System (Continued)
Component
Type
a
Minimum
Required
Required Configuration per Component