Filter
Top Products
1 – Introduction
Regulatory and Safety Notices
SN0054628-00 A 1-5
Q
EN 60825-1:1994+A11
EMC: FCC Rules Part 15, Subpart B,2001.Class A (US)
ICES-003:1997. Class A
ANSI C63.4:2000
EN55022 (1998), Performance Criteria A
EN50081-1 (1992)
EN50082-1 (1997)
EN55024 (1998)
EN61000-3-2 (1995) A14:2000, Performance Criteria A
EN61000-3-3 (1995), Performance Criteria B
IEC61000-4-2 (1995) A1:1998, Performance Criteria B
IEC61000-4-3 (1995) A1:1998, Performance Criteria B
IEC 61000-4-4 (1995), Performance Criteria B
IEC61000-4-5 (1995), Performance Criteria B
IEC61000-4-6 (1996), Performance Criteria A
IEC61000-4-11 (1994), Performance Criteria B and C following the provisions of
the Low Voltage Directive 72/23/EEC and EMC Directive 89/336/EEC and is Marked
in accordance with the CE Marking Directive 93/68/EEC.
Any device that uses electricity must be handled carefully; follow these guidelines
to ensure general safety:
■ Keep SANbox SSP area clear and dust-free during and after testing.
■ Place SANbox SSP in a secure and stable area.
Use the appropriate AC power for the system. The system components operate on
input voltages and frequencies within the ranges of 100 to 240 VRMS and 50/60 Hz
without the need for operator adjustments.
WARNING!!
SANbox SSP may have more than one power supply connection for
standard operation. All power supply connections need to be
removed to fully de-energize the unit.